BIR KAMERALI IKKI SILINDRLI JINDA TOLANING SHIKASTLANISHI BO’YICHA OPTIMAL MATEMATIK MODELL TANLASH ПОЛУЧЕНИЯ САМОЙ ОПТИМАЛЬНОЙ МАТЕМАТИЧЕСКОЙ МОДЕЛИ ПОВРЕЖДЕНИЯ ВОЛОКНА НА ОДНОКАМЕРНОМ ДВУХ ЦИЛИНДРНОМ ПИЛЬНОМ ДЖИНЕ. OBTAINING THE MOST OPTIMAL MATHEMATICA
Ключевые слова:
Linear, Exponential, Logarithmic, Polynominal and Level models, Excel program, Working camera, Mathematical modeling. Линейная, Экспоненциальная, Логарифмическая, Полиномиальная и Уровневая модели, Программа Excel, Рабочая камера, Математическое моделирование. Chiziqli, Ekisponensial, Logarifmik, Polinominal va Darajali modellar,Excel dasturi,Ishchi kamera, Matematk modellash.Аннотация
Excel dasturida. Bir kamerali ikki silindrli jin mashinasida tolani eng kam shikastlanishga olingan sinovlarni tekshirishni matematik modellashtirish turlari orqali optimal modelni tanlash.
Математическое моделирования в программе Excel однокамерного двух цилиндрного джина на наименьшие повреждения волокна. Получения самой оптимальной математической модели приближенный к полученным практическим путем данных.
Mathematical modeling in the Excel program of a single-chamber two-cylinder saw gin for the least damage to the fiber. Obtaining the most optimal mathematical model close to the data obtained in a practical way.
Библиографические ссылки
Wang, G.H. and Li, Y.X. (2022) Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation. Journal of Iron and Steel Research International, 29, 462-473. https://doi.org/10.1007/s42243-021-00581-7
Hassan, M. (2017) Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard. Materials Sciences and Applications, 8, 673-684. https://doi.org/10.4236/msa.2017.89048
Ning, B., Wu, H.B., Niu, G., et al. (2022) Cold Compression Deformation Method for reducing Residual Stress and Uniformizing Micro-Property in Ferrite Steel. Journal of Iron and Steel Research International, 29, 503-511.
https://doi.org/10.1007/s42243-021-00563-9
Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106.
https://doi:10.11648/j.ajmie.20160103.2
Wang, Y.D., Zhang, L.F., Yang, W., et al. (2022) Effect of Nozzle Type on Fluid Flow, Solidification, and Solute Transport in Mold with Mold Electromagnetic Stirring. Journal of Iron and Steel Research International, 29, 237-246.
https://doi.org/10.1007/s42243-021-00577-3
Azizov, S.M. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99.
Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, Article ID: 07020.
https://doi.org/10.1051/e3sconf/202127307020
Jiang, D.B., Zhang, L.F. and Wang, Y.D. (2022) Effect of Mold Electromagnetic Stirring on Solidification Structure and Solute Segregation in Continuous Casting Bloom. Journal of Iron and Steel Research International, 29, 124-131.
https://doi.org/10.1007/s42243-021-00702-2
Briseno, J. and Casanova-del-Angel, F. (2021) Fracture Mechanics on Aluminum Specimens. World Journal of Mechanics, 11, 237-257.
https://doi.org/10.4236/wjm.2021.1112016
Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, Article ID: 07021.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S.M. (2022) Calculation Energy of Efficiency New Ginning Machine. Journal: Engineering, 14, 163-172. https://doi.org/10.4236/eng.2022.144016
Mamatovich, A.S., Abdusamat, K. and Arras, P. (2013) The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw. World Journal of Mechanics, 3, 58-61. https://doi.org/10.4236/wjm.2013.31004
