KOLOSNIK PUANSON MODELINI CAD YORDAMIDA TAYYORLASH. ПОДГОТОВКА МОДЕЛИ ПУАНСОНА КОЛОСНИКА С ИСПОЛЬЗОВАНИЕМ CAD. PREPARATION OF THE GRATE PUNCH MODEL USING CAD.
Ключевые слова:
Grid, 3d model, NX1.2 program, sketch, curve, extrusion, chamfer, pattern geometry, trimming of the body. Колосник, 3d модель, программа NX1.2, эскиз, кривая, выдавливание, фаска, геометрия выкройки, обрезка тела. Kolosnik, 3d modeli, NX1.2 dasturi, sketch, curve, extrude, faska, patten geometriy, trim body.Аннотация
Biz yangi turdagi kolosnik puanson modelini CAD yardamida tayyorlash uchun NX1.2 dasturidan foydalanib har qanday buyum narsa, extiyot qismlar va ishlab chiqarish uchun uni qayerda ishlatilishiga qarab yaratishga erishish.
Мы используем программу NX1.2 для подготовки модели колосника пуансона нового типа в CAD, чтобы добиться создания любого продукта, запасных частей и производства в зависимости от того, где он используется.
We use the NX1.2 program to prepare a new type of punch grate CAD model to achieve any product, spare parts and production, depending on where it is used.
Библиографические ссылки
Muradov R. va boshqalar. Jin mashinasi konstruksiyasini takomillashtirish yo’llari Monografiya. “Namangan” nashriyoti. -2016, 124 bet .
Omonov F.B. Paxtani dastlabki ishlash bo'yicha spravochnik (ma’lumotnoma) nashriyot. Toshkent 2008.
Wang, G.H. and Li, Y.X. (2022) Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation. Journal of Iron and Steel Research International, 29, 462-473. https://doi.org/10.1007/s42243-021-00581-7
Hassan, M. (2017) Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard. Materials Sciences and Applications, 8, 673-684. https://doi.org/10.4236/msa.2017.89048
Ning, B., Wu, H.B., Niu, G., et al. (2022) Cold Compression Deformation Method for reducing Residual Stress and Uniformizing Micro-Property in Ferrite Steel. Journal of Iron and Steel Research International, 29, 503-511. https://doi.org/10.1007/s42243-021-00563-9
Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106.
https://doi:10.11648/j.ajmie.20160103.2
Wang, Y.D., Zhang, L.F., Yang, W., et al. (2022) Effect of Nozzle Type on Fluid Flow, Solidification, and Solute Transport in Mold with Mold Electromagnetic Stirring. Journal of Iron and Steel Research International, 29, 237-246. https://doi.org/10.1007/s42243-021-00577-3
Azizov, S.M. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99.
Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, Article ID: 07020. https://doi.org/10.1051/e3sconf/202127307020
Jiang, D.B., Zhang, L.F. and Wang, Y.D. (2022) Effect of Mold Electromagnetic Stirring on Solidification Structure and Solute Segregation in Continuous Casting Bloom. Journal of Iron and Steel Research International, 29, 124-131. https://doi.org/10.1007/s42243-021-00702-2
Briseno, J. and Casanova-del-Angel, F. (2021) Fracture Mechanics on Aluminum Specimens. World Journal of Mechanics, 11, 237-257. https://doi.org/10.4236/wjm.2021.1112016
Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, Article ID: 07021.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S.M. (2022) Calculation Energy of Efficiency New Ginning Machine. Journal: Engineering, 14, 163-172. https://doi.org/10.4236/eng.2022.144016
Mamatovich, A.S., Abdusamat, K. and Arras, P. (2013) The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw. World Journal of Mechanics, 3, 58-61. https://doi.org/10.4236/wjm.2013.31004
